Przetłumaczy mi ktoś plugin ajparkour?

plik messages.yml

alreadyin: '&cYou are already in parkour!'
start:
  score: '&aStarted parkour! &7Try to beat your high-score of &r{SCORE}&7!'
  first: '&aStarted parkour!'
  no-area-player: '&cNo arena or player could be found called ''{INPUT}''!'
  unknown-player: '&cCannot find that player!'
  unknown-area: '&cCannot find that area!'
  started-other: '&aStarted parkour for {PLY}!'
  started-other-area: '&aStarted parkour for &l&f{PLY}&r&a on area &l&f{AREA}&r&a!'
noperm: '&cYou do not have permission to do that!'
score: '&7Score &r&l{SCORE}'
beatrecord: '&aCongrats!&7 You beat your previous score of &f{SCORE}&7!'
beatrecord-ingame: '&aCongrats! &7You just beat your previous highscore! Keep going!'
disabledworld: '&cYou cannot start parkour from this world!'
block:
  potion: '&cNope!'
  place: '&cNope!'
  break: '&cNope!'
numberformatexception: '&cThat is not a valid number!'
areafull: '&cCould not start parkour because the area is full! &7Try again later.'
must-be-ingame: '&cYou must be in-game to do that!'
not-in-game: '&cYou must do this command from the console!'
couldnt-find-player: '&cCould not find player {PLAYER}'
list:
  header: '&9Players playing parkour:'
  format: '&6{NAME} &7- &e{SCORE} jumps'
  none: '&7None'
nobodys-played-yet: '&cNobody has played parkour yet!'
first-position: '&eFirst position set!'
second-position: '&eSecond position set!'
setup-done: '&aYou can now do &2/ajParjour start&a to do parkour!'
reload:
  usage: '&cUsage: /{CMD} reload <file>&7 Files: {POSS}'
fallpos:
  set: '&aFall position set!'
  removed: '&aFall position removed!'
top:
  header: '&9Top Scores:'
  header-area: '&9Top Scores for {AREA}:'
  format: '&a{#}. &6{NAME} &e{SCORE} jumps'
fall:
  normal: '&cYou fell! &7Your score was &r{SCORE}'
  force:
    base: '&cYour parkour game was ended because '
    reasons:
      teleport: you teleported
      afk: you went AFK.
errors:
  blocknotair:
    base: '&c&lAn error occured:&r&c The block is not air!'
    player: '&6Tell an admin, and try again later.'
    admin: '&6Make sure the parkour area is completly air, and that the plugin has
      been correctly set up by reading /{CMD} setup.'
  notsetup:
    base: '&cajParkour has not been set up yet.'
    player: '&6Ask an admin to set it up!'
    admin: '&6For info on how to set it up, do /{CMD} setup'
  too-many-players: '&cThere are too many players in parkour right now. Try again
    later.'
migrate:
  more-args: '&cPlease provide the source to migrate from!'
  success: '&aMigrated {COUNT} scores!'
  error: '&cSomething went wrong. There is probably more information in the console.'
placeholders:
  stats:
    no-data: '---'
    time-format: '{m}m {s}s'
  current:
    no-data: '0'
commands:
  help:
    header: '&aajParkour made by &2ajgeiss0702&a!'
    start: '&6 /{CMD} start &7- &9Start parkour!'
    startarea: '&6 /{CMD} start <area> &7- &9Start parkour in a certain area.'
    startothers: '&6 /{CMD} start <player> [area] &7- &9Start another player''s parkour
      in a certain area.'
    top: '&6 /{CMD} top &7- &9See the top 10 players!'
    list: '&6 /{CMD} list &7- &9See everyone that is playing parkour, and their current
      scores.'
    setup: '&6 /{CMD} setup &7- &9Commands for setting up the plugin. &7(required
      permssion: ajparkour.setup)'
    portals: '&6 /{CMD} portals &7- &9Commands for setting up portals.'
    areas: '&6 /{CMD} areas &7- &9List all loaded areas'
  setup:
    header: '&aajParkour&2 setup commands'
    create: '&6 /{CMD} setup create &7- &9Create an area'
    pos1: '&6 /{CMD} setup pos1 &7- &9Set the first position'
    pos2: '&6 /{CMD} setup pos2 &7- &9Set the second position'
    we: '&6 /{CMD} setup we &7- &9Select first and second position with worldedit'
    fallpos: '&6 /{CMD} setup fallpos &7- &9Set fall position!'
    edit: '&6 /{CMD} edit &7- &9Load an existing area into the editing queue.'
    info: '&6 /{CMD} setup info &7- &9Show which points you have set so far!'
    diff: '&6 /{CMD} setup difficulty &7- &9Set the area''s difficulty!'
    max: '&6 /{CMD} setup max &7- &9Set the maximum number of people allowed in the
      area!'
    save: '&6 /{CMD} setup save &7- &9Saves and enabled the area. (This should be
      done last)'
  portals:
    header: '&aajParkour&2 portal commands'
    list: '&6 /{CMD} portals list &7- &9Lists all portals.'
    create: '&6 /{CMD} portals create &7- &9Create a portal.'
    remove: '&6 /{CMD} portals remove &7- &9Remove a portal.'
  listareas:
    header: '&9Loaded parkour areas:'
    format: '&7 - &a{NAME} &7Difficulty: &9{DIFFICULTY}'
    none: '&7No areas loaded!'
  not-on-whitelist: '&cYou cannot use this command while on parkour!'
not-from-console: '&cYou cannot run this command from the console!'
setup:
  no-name: '&cYou must name your area!'
  invalid-name: '&cYou can''t name your arena that.'
  edit:
    no-name: '&cPlease enter the name of an area to edit!'
    loaded: '&aArea loaded for editing! Re-set positions using /{CMD} setup'
    no-area: '&cAn area with that name does not exist!'
  need-to-create: '&aYou must create an area before editing it!'
  we:
    not-installed: '&cYou need to have WorldEdit installed to use this command!&7
      Try using the built-in pos1 and pos2 setup commands.'
    incomplete-selection: '&cYou must make a complete worldedit selection before doing
      this!'
  created: '&aArea created and added to the editing queue. See &2/ajParkour setup&a
    or view the plugin page for steps to set it up!'
  already-creating: '&cAn arena is currently being set up. &aPlease either save that
    arena, or run this command again to override. (&c&lNOTE:&r&c Overriding will erase
    all of the data of the arena being set up before!)'
  info:
    header: '&6Colors: &aSet &7Not set (optional) &cNot set (required)'
  set:
    pos1: '&aFirst position set!'
    pos2: '&aSecond position set!'
    fallpos: '&aFall position set!'
    we: '&aPositions set!'
    diff: '&aDifficulty set!'
    max: '&aMax players set!'
  max:
    need-args: '&cPlease enter a number!'
  diff:
    not-valid: '&cInvalid difficulty! &7Valid difficulties are &feasy&7, &fmedium&7,
      &fhard&7, &fexpert&7, and &fbalanced'
    need-args: |-
      &cPlease enter a difficulty! &7Valid difficulties are &feasy&7, &fmedium&7, &fhard&7, &fexpert&7, and &fbalanced&7.
      &aBalanced difficulty will make the parkour get harder as the player gets higher scores.
  save:
    not-done: '&cYou have not set all of the required settings! &7Check &f/{CMD} setup
      info&7 to see what you have left.'
    success: '&aArena {NAME} saved and loaded!'
  area:
    too-small: |-
      &cThe area you just created does not meet the minimum reccomended size of 20x20x20!
      &7You can continue creating the area, but know you may run into issues with players running into each other, and possibly parkour going outside the area!
      &7Your area: {l}x{w}x{h} (XxZxY)
portals:
  list:
    header: '&2Parkour Portals'
    format:
      area: '&2{NAME} &7- &a{COORDS} &7- &a{AREA}'
      no-area: '&2{NAME} &7- &a{COORDS}'
  create:
    help: '&cUsage: /{CMD} portals create <name> [area]'
    success: '&aCreated a portal named ''{NAME}'' at your current location! &7You
      might have to restart the server for the portal to start working.'
  remove:
    help: '&cPlease enter the name of the portal to be removed!'
    cannot-find: '&cCannot find a portal with that name! Make sure you spelled it
      correctly, and that you put the same caps too.'
    success: '&aRemoved portal ''{NAME}''!'
    no-portals: '&cNo portals have been set up yet! Please create portals before removing
      them.'
gui:
  selector:
    title: Block Selector
    items:
      random:
        title: '&rRandom Blocks'
        lore: '&7Will pick a random block.'
      selected:
        lore: '&aCurrently Selected'
      nextpage:
        name: '&a&lNext Page'
      prevpage:
        name: '&a&lPrevious Page'
items:
  blockselector:
    name: '&aBlock Selector'
reset:
  usage: '&cUsage: /{CMD} reset <player>'
  success: '&aReset score of {PLAYER} to 0'
blockselector:
  openedfor: '&aOpened block selector for {PLAYER}'
areas:
  remove:
    help: '&cPlease enter the name of the area to be removed!'
    cannot-find: '&cCannot find an area with that name! Make sure you spelled it correctly,
      and that you put the same caps too.'
    success: '&aRemoved area ''{NAME}''!'```

Są tłumacze freelancerzy, którzy za niewielką opłatą są w stanie wykonać takie zlecenie.
https://www.fiverr.com/

1 polubienie

Przecież to jest kilka linijek zrobisz to w ciągu 30 min maksymalnie

Oprócz wrzucenia linijek w Google Translate możesz to przyrównać do tłumaczenia np. przez DeepL

Ofc polecam naukę angielskiego, przydaje się na codzień :slight_smile:

4 polubienia

Z takimi prostymi tłumaczeniami to google translate sobie poradzi, na spokojnie :smiley:

Takie rzeczy można przetłumaczyć spokojnie ma DeepL czy google translator. Jesli szukasz bardziej zaawansowanego rozwiązania i ci się nie chce, użyj platformy Fiverr.

Ten temat został automatycznie zamknięty 32 dni po ostatnim wpisie. Tworzenie nowych odpowiedzi nie jest już możliwe.